 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 90 plus furnace ignition trouble
This furnace goes to lockout when running at 68 to 70 degrees; seems OK at 72 + degrees. Main blower has been renewed-confirmed and furnace was cleaned 5 months ago (not confirmed how well it was serviced though; by a technician.) If the furnace stops working, you can manually reset at SSU or just raise temp on digital thermostat (new stat, was a T-87F existing.) My thinking is the burner may not have been cleaned and I do not have the code yet from furnace. Any suggestions?
|
||||
Check out some similar questions!
My bryant furnace is in some type of lockout mode. When it call for heat, the blower motor only comes on. It looks to be error code 12. How can this be fixed.
I bought a house with a Bryant plus 80 heater. There was no thermostat so I connected the red and white wires (as I saw on one of your answers) to gat it fired up. The burners ignited but flamed out in less than a minute and the led code showed #34 , (Ignition proving failure) but it did fire up...
I am having a an intermittent ignition lock out problem. It is a Bryant Plus 90 evolution model 355 aav with a LP conversion. The stat will call for heat it starts the cycle evacuation fan,ignitor gas valve clicks but more often than not no ignition. Of course it does this several times till it...
Hi, I was out all day and when I came home my house was freezing and the furnace wasn't on. It's a Bryant Plus 80t according to the front panel, but the online manual shows different pictures and descriptions when I look that up. The LED status is flashing 4 short, 3 long, which doesn't match to...
Byrant 90% Model 399A furnace. The Blower works fine and the filter is clean. Once the furnace starts there is no ignition. Where do I start with the ignitor or the spark generator. Suggestions please. Ron
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
