Ask Experts Questions for FREE Help !
Ask
    vharsky's Avatar
    vharsky Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2014, 04:02 PM
    Furnace will not work
    The red button blinks five times, but there is no flame when the motor is running. How do I go about fixing the problem? It pumps air, but its cold air
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Feb 26, 2014, 05:53 PM
    It is running in safe mode. Look at the code on the inside of the air handler door. We have no idea as to the make or model of your furnace. Typical issues include bad surface ignitor, dirty or bad flame sensor, plugged or bad pressure switch but could be others.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rheem GAS furnace blower won't shut off won't let furnace work [ 3 Answers ]

I have a Rheem 90 gas furnace RGSA10EZAJS and The blower for the inside runs all the time I unhooked the thermstat wires to make sure it wasn't it I have also replacedthe IFC board but it still runs all the time and the furnace will not work I hope you can help Thank You

Furnace does not work [ 8 Answers ]

I have a circa 1996 lennox 3 ton residential unit (80mgf2-45a-5). I went to turn on the heat and nothing happened. I tried the A/C and same. I replaced the digital thermostat with a round honeywell one that I had spare. When turning the dial (and looking for the little spark that comes on when...

Furnace do not work [ 1 Answers ]

My home ac/heat. The ac work but the furnace do not work. The system is a ge force air system. I changed the thermostat but when iturn it heat I get no sound at all.

Furnace will not work [ 4 Answers ]

I've ran the diagnostics and it says that the furnace is in full working operation. But when I set it to on it will not start up.

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search