Ask Experts Questions for FREE Help !
Ask
    John 45's Avatar
    John 45 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2014, 02:10 PM
    I have Carrier furnace,Weather Maker 9020, problem burners when come's on only stays
    I have a Weather Maker 9020 when burners light they stay on 0nly about 5 minutes not heating house keeps recycling doing same thing.
    edward3's Avatar
    edward3 Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Feb 21, 2014, 06:30 PM
    Could be a Limit switch tripping out , check your air flow. Also furnace may need a good service cleaning . Hopefully this will help out ,or give you a starting place.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier weather maker [ 1 Answers ]

My weather maker 8000 is driving my crazy. Keep getting code33 I have changed filters cleaned flame sensor took flame roll out switch off connectors and taped together. It will start it's sequence and flames come on and seems like it's going to work but after a little bit it pops again and code 33...

Carrier weather maker 8000 furnace [ 0 Answers ]

Furnace cuts out before reaching set temp

Carrier Weather Maker 8000 furnace not working properly [ 1 Answers ]

My Carrier Weather Maker 8000 furnace isn't working properly. I can have the furnace set to about 70 degrees, and it will get 65 degrees in the house, and the furnace will not go on. When it does go on, it stays on for about 15-20 seconds, and then it shuts down. I have to unplug it for about 20...

Carrier weather maker 8000 [ 6 Answers ]

Hi everyone. I am new to this forum and would like your help. I have a Carrier Weather Maker 8000 and I am having problems with it. Its keeps shutting off before it reaches the desired temperature . I made a couple of clips that I hoped would explain the problem better. The Start:...

Carrier weather maker 8000 [ 5 Answers ]

Model # 58TUA06008 has had the main board replaced but it keeps shuting off and then will restart after four hours or if I shut the power off and turn it back on. Is this an issue with the heat sensors or something else. I known the main board has been recalled is there any other issues. Thanks G

View more questions Search