 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Intertherm Furnace Troubleshooting
Sometimes when my oil furnace cuts in, there is a clanging, rattling noise. So I have to turn it off with the emergency switch. When I do this, there is a strong oil smell. Would you be able to tell me what the problem could be? Thank You.
Gary |
||||
|
||||
|
Any type of oil furnace needs to be serviced every year. Electrodes and nozzle needs to be clean and serviced. Should contact someone that has this type of experience. Sounds to me like there is a lack of fire , due to out of adjustment of the parts that I have listed that need service. Hopefully this will help you some.
|
||||
Originally Posted by edward3
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start
Furnace kicks on and off when suppose to but when blower shuts down the heating element doesn't have to flip switch to shut off element
I have a number of mobile homes that are rental units in a very cold part of Arizona (due to be 2 degrees in the morning). I have replaced the furnaces in the past three years with new Intertherm gas furnaces. I now have three of the furnaces that go out in the middle of the night, in order to...
1986 intertherm electric furnace<only blowing cool air on heat setting. I inspected the heat coils and they don't look broken
I need the Fused Disconnect that works on Interthem Furnace Model FEH-015HA-04 w/Serial #FEH-9-02378
View more questions Search
|
