Ask Experts Questions for FREE Help !
Ask
    danny mills's Avatar
    danny mills Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 9, 2007, 06:14 PM
    Will not start, but backfires, my briggs vanguard 16 single cylinder, it does have an
    The anti backfire solenoid appears to be working, and it does click when ignition turned on. I cleaned the plug and regapped but does the same backfire, any help would be appreciated thanks.
    Danny
    [email protected]
    newaukumdon's Avatar
    newaukumdon Posts: 525, Reputation: 44
    Senior Member
     
    #2

    Apr 10, 2007, 10:56 PM
    I would replace the plug and put fresh fuel in it. The anti-backfire solenoid is to limit the raw fuel entering the hot cylinder on shutdown. It does not guard against all backfire scenarios.
    Don

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & stratton backfires through the carby and won't run [ 8 Answers ]

My 12.5 hp B&S willnot runafter winter it is backfireing through the Carby & air filter

Briggs 14.5 OHV won't start [ 6 Answers ]

I have a Briggs 14.5hp riding lawn mower that when you try to start the flywheel won't turn or will make a slow turn and pause then another slow turn and stop. I cleaned the ground cables, replaced the battery, carb, and spark plug. Trying to jump across the solenoid doesn't work either so its not...

16.5 Briggs in MTD will not start [ 5 Answers ]

I have a 16.5 ovh Briggs in an MTD. The mower started and ran fine the last few mowings. However, now it will not fire. The starter will turn the motor for a few seconds and then it will "bog" down. I can turn the motor by hand past the "hard" part of the engine cycle and the starter will turn the...

Briggs 16.5 won't start [ 1 Answers ]

I have a B/S 16.5 OHV Twin (Commercial model). Generally speaking it starts as soon as I hit the key. Today when shutting it down it backfired twice (two different occasions) but started normally. When I went to start it to put it in the shed no luck. Doesn't sputter or backfire. Changed the...


View more questions Search