 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Icons of a noma programmable thermostat
There is an icon of a man showing on my noma programmable thermostat as well as a weird looking thing that looks like helicopter blades. The fan icon is moving as well and the flame icon is different.
The furnace seems to be working okay. Do these icons refer ONLY to the thermostat or are they saying that the furnace needs attention (the man icon)? |
||||
Check out some similar questions!
I have a gas fan forced furnace, and the default setting on the stat is C-3, can I change it to C-0 to keep the furnace from cycling too much. From what my book stat book says C-3 it cycles 5 times per hour, and if I go to C-0 it disables the cyclees per hour, and just goes by the temp setting. My...
I have just moved into a new home that has a noma programmable thermostat , the problem is there is no programing istructions. Can you possibly help with this.
Recently installed a noma programmable thermostat and same was working fine for three or four days but this morning the furnace kept running. Temp was set @67F but furnace was still running @ 79+F .The only way to stop the furnace was to manually shut it done.Why is it doing this and what must I do...
I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
