Ask Experts Questions for FREE Help !
Ask
    usa12fox's Avatar
    usa12fox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 11, 2014, 06:59 PM
    How do I turn blower on in furnace gmvc951155ddx
    Furnace not working, how can I get just the blower to turn on and off manually? Reason is I am using my wood stove but blower on it is small but hook into the same duct work. I want to use the blower on the furnace to help push the heat from the wood stove up into the house. Thank you
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 11, 2014, 07:24 PM
    Check your thermostat for a small switch marked AUTO/ON. That controls the fan, switch it to ON. This assumes your furnace still is powered, we don't know what's wrong with that part.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace will not turn on blower [ 1 Answers ]

When power is turned on the light blinks at the quick rate. The burner comes on and after a couple of minutes the light gores to the 4 blink, open high limit device. The blower never comes on.

Furnace blower for AC will not turn on [ 1 Answers ]

My thermostat works, my airconditioner kicks on but my furnace blower will not turn on.

How do I turn on just the blower in my furnace? [ 7 Answers ]

I live in a mobile home. I had the furnace replaced last year. The old one had two places to plug the blower into. One was for the heat, and the other was just to have to blower running by itself. I would like to be able to have just the blower on by itself. How do I do that?

Blower in furnace does not turn on [ 6 Answers ]

Gentlemen... turned air on for the 1st time this year. a/c unit outside fires up fine... but blower in furnace does not. Replaced thermostat during winter because blower would not shut off. After installation furnace worked as it should. I must have wired thermostat wrong? Thanks for any and all...

Furnace blower does not turn on [ 1 Answers ]

Blower was working fine until today. Turned thermostat up to 70 degrees and the pilot lit the gas but after maybe a minute or two the blower did not come on and furnace smelled like something was burning maybe because it was too hot because the blower did not turn on. HELP please. Thank You...

View more questions Search