Check out some similar questions!
What kind of pressures should I be running in heat mode?
[ 2 Answers ]
I have a 2 1/2 ton goodman heat pump. What should my pressures be in heat mode? 410a 50 degrees outside temp. Thank you for your help.
I have a Goodman heat pump, I think about 5 ton unit. The fan keeps stopping
[ 2 Answers ]
The fan will stop after aprox 5 - 10 minutes. The motor was replaced, same issue. Then the tech bypassed the defrost relay, same issue. Then he wired straight to the contactor with same issue.
My Goodman heat pump, model GSH130361AD, in heat mode outside unit does not start up.
[ 10 Answers ]
Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...
Goodman Heat Pump compressor keeps running
[ 1 Answers ]
In Heat mode, compressor outside continues to run even when the blower inside is not running. If I switch the thermostat switch from Heat to off, the compressor stops but sometimes kicks back on, even with the thermostat switch still in the off position. At this point, I have to cut power via the...
Goodman unit heat pump connecting toRTH7400 stat
[ 1 Answers ]
Installed new units 2 1/2 ton goodman units, installed factory 14.25 kw heating element. My biggest problem is the low voltage wiring. The indoor unit has 5 wires coming out they are red,green, white, brown, blue. The outside unit has 5 wires also, blue, white, orange, yellow, red. The cond.... View more questions Search
Add your answer here.
|