 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
XL19i trane condenser motor went out replaced motor again 2 days later quite again
I'm working on a XL19i. The condenser motor went out so I replaced the motor.
2 days later the new motor quits. On the air handler communicating read out errors it said ac high voltage... can u help? |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
What is the rpm of Condenser fan motor of Trane Model # TCH120C400AB
Is there a relay that triggers the Condenser motor? Also, I checked the voltage at the AC controller and it is at 26 VAC, is this a problem if it is intended to be 24?
Wiring looks good. Does it matter if capcitor is touching metal ? We had no way to attach the new capiter. The old capiter with 3 wires is enclosed in plastic tube, so we did not remove it, just bypassed it. New capiter has 2 wires, instead of 3. When we unplug the new capitor, fan still...
Hello, Monday, a/c condenser fan was making loud noise and within an hour of us noticing this, The condenser fan was froze up We replaced the condenser motor and capacitor . It appeared to be working fine for about an hour after new condenser motor and capacitor was in. House temp went...
View more questions Search
|
