Ask Experts Questions for FREE Help !
Ask
    ynwallace's Avatar
    ynwallace Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 29, 2014, 04:38 PM
    I replaced by Carrier/Bryant board and the led is not coming on
    I had to get a new Carrier Bryant Furnace Control Board HK42FZ011 (the replacement for the HK42FZ011) - I installed it as it should be but it's still not working (tried to run the test and led not coming on at all).

    Help?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jan 29, 2014, 04:56 PM
    What was wrong with the first board? Sure you are getting power to the board?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant plus 80 led codes [ 0 Answers ]

Bryant Plus 80 LED Codes. 3 blinks and the one separate blink. What does this mean?

Carrier/Bryant Furnace control board . [ 9 Answers ]

I replaced Carrier/Bryant board and the led is flashing rapidly.. what can be wrong? It looked like there's problem with polarity,but everything is fine, the led is still flashing.. uff.. Led Code: Continuous on rapid flashing-Line voltage 115 polarity reversed.If twinned,refer to twinnig kit...

LED code on Bryant control board [ 0 Answers ]

On Bryant furnace, continuous flashing code shows reversed polarity. How do you correct?

I have a bryant 397h furnace and the blower will not shut off.replaced circuit board [ 2 Answers ]

I have a bryant 397h furnace and the blower will not turn off.I replaced the control center circuit board and still runs. Any suggestions?

View more questions Search