 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The cold water side of my master bedroom faucet has no water. The hot water side works fine. I shut off the cold water supply, I disconnected the cold water supply, and slowly opened the valve to check for water. None. All of the other faucets work, to include the other sink in the bathroom, cold...
I have a built-in oversized tub set into a tile-covered frame with a duel water controls to a single rectangular faucet that give the water a waterfall effec into the tub. Hot water pressure recently dropped to a trickle. All the other nearby outlets (sinks, showers) are fine. Can't get to the...
I've been building my house for several years and the master bath has never been finished. The shower head and dual handle knobs were installed a while ago but the shower has not been regularly used. I just completed installing the sink fixtures and drain. The sink has low water pressure and the...
I've been building my house for several years and the master bath has never been finished. The shower head and dual handle knobs were installed a while ago but the shower has not been regularly used. I just completed installing the sink fixtures and drain. The sink has low water pressure and the...
In the last few days, the cold water pressure in my bathroom has gone. It is affecting the sink, bath and toilet but the hot is fine. The source to the bathroom is from a water tank in the loft. All other water is sourced through the mains and is fine. What can I do to fix it without calling...
View more questions Search
|
