Ask Experts Questions for FREE Help !
Ask
    pat smoker's Avatar
    pat smoker Posts: 2, Reputation: 1
    New Member
     
    #1

    Jan 13, 2014, 11:43 AM
    Aire-flo furnace problems
    The limit switch trip on the inducer housing and locks furnace out this is a 905% <BR>furnace
    pat smoker's Avatar
    pat smoker Posts: 2, Reputation: 1
    New Member
     
    #2

    Jan 13, 2014, 11:46 AM
    I have a 90 airflo furnace that trips the limit on the inducer housing and locks out furnace any suggestions
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #3

    Jan 13, 2014, 12:54 PM
    Check that flue in clear? How long does the inducer fan run? Does in seem to come up to speed?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Aire flo furnace troubleshooting [ 1 Answers ]

Aire-Flo AF90MPE075 - on a call for heat the combustion blower runs, pressure switch closes, his glows and gas valve opens for a split second. Sometimes the inrush of gas is not enough to even ignite and sometimes it is enough to ignite across the burner but then goes out immediately. Again, this...

I have an Aire-Flo gas furnace - model no. AF80MPA075B3A [ 1 Answers ]

I have an Aire-Flo gas furnace - model no. AF80MPA075B3A I rent - however I believe it was installed around 2003. For the last month - the furnace will start, the gas tries to ignite but after 2 seconds it will shut off. It tries to ignit 3 times - then if unseccessful the furnace shuts off. It...

Aire-Flo gas furnace periodically shuts down. [ 2 Answers ]

I have an Aire-Flo gas furnace - model no. AF80MPA075B3A I rent - however I believe it was installed around 2003. For the last month - the furnace will start, the gas tries to ignite but after 2 seconds it will shut off. It tries to ignit 3 times - then if unseccessful the furnace shuts off. It...

Aire-Flo Gas furnace Not Starting [ 1 Answers ]

I have an Aire-Flo Furnace ( Model AF90MPE075U3). Last winter it began malfunctioning. The local repair man said the inducer fan was bad and replaced it. It worked for a while and began acting up again. He then decided the intake air line was to small and not sloped properly. I added a second line...

Gas furnace not blowing hot air but blower is working fine. I have an Aire-flo AF80 [ 1 Answers ]

I have an Aire-flo model AF80 forced air furnace that is not putting out any heat. The blower is working fine. I have tried the circuit breaker and replacing the thermostat but neither seems to work. Anyone have any suggestions?


View more questions Search