Ask Experts Questions for FREE Help !
Ask
    lovejoyd's Avatar
    lovejoyd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2014, 01:49 PM
    Troy bilt snowblower won't engage the wheels
    The snowblower will not engage wheels when you push throttle down, have replaced disc belt and drive belts
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Jan 12, 2014, 04:43 PM
    Hi, has the pin sheared?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jan 12, 2014, 05:37 PM
    Yes, engage the drive and then look to see if the drive axle is turning inside the wheel hub. If that is not the case try taking up the adjustment on the drive engagement handle, usually a threaed shaft with a nut.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why won't my blades engage on my troy bilt ltx 13.5 [ 1 Answers ]

I was cutting the grass and disengaged the blades to go across the gravel driveway and now the blades will not engage. Can someone please help me my grass is out of control!

Troy-bilt Model 609 has an Electric PTO that won't engage [ 0 Answers ]

How can I check the electric PTO clutch? I can't find a schematic diagram for the mower, only a wiring diagram which is useless.

How to engage wheels on snowblower [ 2 Answers ]

Craftsman Snowblower 2 Stage. Auger works fine. Appears RIGHT wheel is the drive wheel. The LEFT wheel appears to only free wheel and also has a pin/bolt with aring on the end placed through the axle. Is there another position for the LEFT pin to be place to engage BOTH wheels as drive wheels?

Troy Bilt lawn tractor-starter won't engage [ 1 Answers ]

I mowed the yard w/out problem 2 days ago. Today I went to start the Lawn tractor and the motor won't turn over. I have never had problems with it before. Do you have any ideas on what I should check? Troy Bilt Super Broncho 42" deck Kohler 19hp/597cc

My Troy Bilt Snowblower won't move [ 2 Answers ]

I have a 3 yr old Troybilt Snowblower 8526, and the gear box has me flustered. I did find one bearing that was frozen, but even after pulling that out of the machine, the gears do not move freely when the smallest spur gear in the box is in place. I put penetrating oil on the gears and I was...

View more questions Search