Ask Experts Questions for FREE Help !
Ask
    zena crenshaw's Avatar
    zena crenshaw Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2014, 08:38 AM
    Fix transmission 1995 ford explorer
    I replaced the seals in my transmission but still had leaks & now it won't go into reverse. It will go in all other gears but revearse. Now what?
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
    		  
    #2

    Jan 12, 2014, 10:42 AM
    Have a professional look at it. Transmissions are not something that the average person can fix.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #3

    Jan 12, 2014, 10:49 AM
    . Check the alignment and operation of the Transmission Range Sensor (TRS)--replace, if necessary.

    . Check all under dash and under hood fuses with a test light or multimeter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1995 ford explorer xlt 4.0 transmission problems [ 17 Answers ]

I changed the transmission fluid on my 1995 ford explorer xlt. I than drove it around the block and the overdrive off light started to blink and the transmission was struggling to change gears. I couldn't get the overdrive off light to shut off. What is my problem?

1995 ford explorer transmission [ 1 Answers ]

Truck drove fine and have had no problems with the transmition. Parked it went into my appointment came out and started it. Put the truck in reverse and backed out. It acted like it didn't have the power to back out. The 4lo lite is on and the transmition won't shift when driven. Help please.

1995 ford explorer 4x4 transmission [ 1 Answers ]

What happens when there is way too much Fluid in the transmission?

1995 ford explorer transmission problems [ 1 Answers ]

OD light flashes, goes in drive up to 25 mph then then kicks out and studders. It also only makes studdering noise in reverse. Fluid is good and red and not burnt smelling at all, please help if you can.

View more questions Search