 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
3way switch wiring diagram
Am attempting to wire a bath room fan with a light and night light to a 3 swtch control . If I use 12-3romex I still need an extra wire from fan to switch ? Or light to switch ? unit is a nutone model qtn80l switch is leviton no. 1755 help! Also it appears I need to use the white wire from switch to blue wire on light or black wire to fan?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a 3 way switch which gets its power from a ceiling light fixture by a 3 wire cable, white, red (hot) and black (hot) . This Switch S1 then is connected to a wall plug and then to the second 3 way switch S2 with a 3wire cable. All 3 way switch wiring diagrams that I have seen show power to...
Hello, I'm unable to find the answer to this question, I'd like to use a 3Way motion sension switch but keep the other switch a normal 3 way. I don't know if it's possible. Thanks for all help, Scott
We are finishing our basement and want to put a switch for shop lights at the bottom of our stairs and one on the outside of two already finished rooms.We are using 12/3 wire and have come to a standstill.All is wired but no power to the receptacles for the shop lights.HELP! What have we done wrong...
I have 3 rooms on one circuit, 20 amp. Lights only. 2 rooms only have light fixture in ceiling and mstr. Bdrm has new ceiling fan with light kit. Ran new romex 12/2 wiring from circuit panel to junction box. From junction box went to each room. Got room1 working by running whitewire (hot) to bottom...
View more questions Search
|
