Ask Experts Questions for FREE Help !
Ask
    MacGirl's Avatar
    MacGirl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 8, 2007, 08:17 PM
    Portable Dishwasher won't stay on faucet
    Hello...

    We just got a portable dishwasher for free, which is virtually brand new, but has no manual. We were told it would be easy to hook-up and that it should work with most any faucet. We tried it on our current faucet and it won't stay on. So, we bought a new attachment to the faucet but it won't stay on that one either. When we hold down the outside of the dishwasher hose thing, it will slide on to the faucet, but when we release it, there is nothing for the little "bumps" to hook in to and it pops off. Before we go back to the store, are we doing something wrong? Does it need a certain type of faucet? The model is Frigidaire FDP750RC S 24" portable.

    Thank you!
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
    		  
    #2

    Apr 9, 2007, 07:13 AM
    You should try calling Frigidaire's 1-800 number to see if they offer an aerator adapter for your specific model.

    1-800-FRIGIDAIRE
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Portable dishwasher [ 5 Answers ]

I just bought a new kitchen faucet with a pull out sprayer as the main fixture. I have a portable dishwasher that worked fine with my old faucet. The attachment for the dishwasher did not fit in the new faucet so I purchased an adapter. The man at the store was worried the sprayer/faucet will...

I want to make my portable dishwasher stationary... [ 6 Answers ]

My old portable dishwasher was set up this way but it was like that when I got the house so I didn't do it. Can I just take the back of the new portable dishwasher, change the hoses so that they are long enough to run through the cabinets to a hot water line and drain pipe? The extra hot water...

Water suppressor needed on lavatory faucet and shower faucet? [ 1 Answers ]

Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks

Portable generator [ 2 Answers ]

The question I have is that my generator is only putting out about 100v. I would like to know if this will cause damage to anything that is running off the generator. Correct me if I am wrong but don't most appliances run between 110 and 120. I was told that the output of the generator could vary...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

View more questions Search