Ask Experts Questions for FREE Help !
Ask
    mmongeau's Avatar
    mmongeau Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 8, 2014, 08:06 PM
    Kohler kitchen faucet drip
    I have a Kohler kitchen faucet on which I have replaced the bearings and o-rings, diverter, valve and aerator. Yet when I turn off the faucet there is a very slow drip out of the spout (a drop every 30 seconds or so). I can often get the drip to stop by touching a cloth to the aerator to absorb the water. This faucet had a one year warranty that is long expired. What else should I check?

    Thanks.
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Jan 8, 2014, 08:31 PM
    Is it a faucet with high arch (spout) ?

    Back to you / Milo
    mmongeau's Avatar
    mmongeau Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jan 9, 2014, 11:11 AM
    It is arched but I would not say it is all that high. It looks like this:

    Name: KohlerForte.jpg Views: 257 Size: 6.5 KB
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kohler Kitchen Faucet [ 6 Answers ]

I have a Kohler pull down faucet in my kitchen. The areator needs to be cleaned. How do I remove the screen. I can't see any way to grab hold of it and I'm not sure how much removes--just the screen or do the spray nozzles move also?

Kohler kitchen faucet [ 6 Answers ]

Cold water side is not working suddenly. All water is on.

Kohler Kitchen Faucet [ 1 Answers ]

I have a Kohler single handle with sprayer, kitchen faucet. The hot water is just a small drizzle. I called and they sent out a spacer assembly. That did not solve the problem, in fact there was now NO hot water. Called again and they sent out new hoses and the brass connector at the handle end,...

Kohler kitchen faucet [ 3 Answers ]

I have a Kohler kitchen faucet, model K-10412, I think. Because of leaks I am trying to replace the o-rings for the spout. Everything I have seen says that the spout should just lift off after the bonnet nut is removed. Mine doesn't. It moves about 1/4 inch and won't move any further. Can you help

New kohler faucet has a slow drip [ 7 Answers ]

Hi Folks, Just installed a new Kohler Simplice model, K-R648 faucet, separate base & faucet and it has a slow drip. I ran the hot and cold each for a minute before connecting the base to the faucet when installing. Now I took the base apart and took the plastic valve apart and everything was...

View more questions Search