Ask Experts Questions for FREE Help !
Ask
    charlestheman's Avatar
    charlestheman Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jan 6, 2014, 11:18 PM
    Lennox starting problem
    My lennox furnace will not come on.the flappe clloses,I hear a click in the ignitor board,but nothing happens

Check out some similar questions!

Lennox AC problem [ 0 Answers ]

When I set the Heat/Cool to Off position, but set the fan mode to On position, the outside AC unit turns on. Is there a problem? Thanks! Simon

Lennox oil furnace rumbles when starting [ 1 Answers ]

Hi, We have a Lennox oil furnace. We use it to suppliment wood heat and in spring and fall when we need a little heat but it's too warm for a fire. Yesterday it started rumbling and vibrating when the furnace first comes on for about 20 seconds, then it gets much quieter, but is still a...

Lennox A/C Problem [ 3 Answers ]

We have a Lennox HVAC, electric. Probably at least 25 years old. We were having a problem when using the electric heat with breakers popping off. We had the unit looked at. The repair guy said we needed a bigger breaker which we installed. The heat worked fine. When we switched to A/C the fan...

Lennox Oil Furnace Problem [ 12 Answers ]

My mom has an oil fired furnace that just stopped working. I replaced the transformer(white rodgers) that has the connections for the Thermostat,flame detector,etc. That didn't fix the problem. I have hit the reset button and that doesn't work either. At one point,I rotated the Fan Limit switch...

Lennox G12 Pilot light problem [ 2 Answers ]

Hello, I have a Lennox G12 furnace. The pilot light blows out every once in a while.(An intermittent problem) The furnace is located in the hallway in the house. There are no drafts or chances of wind that could possibly blow out this pilot light. It is getting a bit frustrating because it is...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.