 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rheem gas furnace blower is on but no flame
My rheem gas furnace blows but there is no flame. The "ok" led light is on but the flame led light is not on. Please help. Email is [email protected]
|
||||
|
||||
|
First, let me suggest you edit your post to delete the e-mail address if you can. This is simply to reduce the spam. Now, on to your problem.
You need to reset the furnace by turning off the power to it for about a minute then turning the power back on. While you are watching the furnace have someone turn the thermostat up to create a call for heat. Please observe what happens & report back with as much detail as is practical as to what happens & when. The order & timing of the events is important. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I received some great help here before with my plumbing so I'm back to solve a furnace problem. Thanks for looking. Unit Information: Rheem RGPH-05NAUER Serial # FD5D302F310005868 Natural Gas, Induced draft, upflow/horizontal Installed in the year 2000
My Rheem furnace model UDGE-06NLAER blower motor keeps running After I changed filter It always stops after 5-10 min. usually but this time . Is the time delay circuit board defectived ?
I have had a PSEG tech out and he says the furnace is running properly but it will not heat the house properly and the air coming out is only luke warm. The furnace has been running for 48 hrs straight and the house is at best still only 66 degrees, and I can't get it any warmer. I have a...
Furnace blower will not stop after flame goes out on a gas furnace
Rheem gas furnace blower will not shut off (Rheem Imperial 80 =) After it is done heading, the blower continues. I have set the thermostat to auto. The batteries in the thermostat are fresh. I actually bought a new fan limit switch and install it. Still continues to blow. I can shut the...
View more questions Search
|
