 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No hot water on the second floor
I have a colonial house. Last night we had hot water in our master bathroom upstairs. Overnight temps were in the single digits... When we turned the knob in the upstairs sink or shower for hot water we get drips. The cold water knob works and cold water comes out. What could the problem be? Water tank is less than 6 months old it is a Weil Mclain and first floor bathroom and kitchen have hot water.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
After installing a kitchen faucet, the water was turned back on and the basement and first floor hot an cold water faucets all work fine. But the second floor (bath/showers) have little to no pressure for hot water only. Please help
I have a hot water heater, about 2 years old, and I can get nothing but hot water from the second floor bathroom, shower and sink, cold faucets. The kitchen and bathroom on the first floor are fine. Any ideas on how this can be fixed?
Hot water heater problems
I have a two-story home, downstairs every faucet works fine, but upstairs is a different story, I have hot and cold water on both sinks but on the bathtubs there's only cold water (only one handle to control hot and cold water) and when I turn the handle to get hot water the flow is close to none....
Recently our shower (shower tub combo) with separate cold and hot taps started only giving luke warm water. The same goes for the hot water in the bathroom sink. This is only in the second floor bathroom. On the mainfloor (Kitchen and batheroom) the water is hot hot hot... in the basement...
View more questions Search
|
