Ask Experts Questions for FREE Help !
Ask
    FBVAUGHN's Avatar
    FBVAUGHN Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 3, 2014, 07:54 AM
    State Select lighting issue
    I have a State Select Mod.# GS650YBRT nat. gas. It will light & the burner will come on for approx. 2 min. then it will shut down completely
    Pilot light included. Thanks for any help with this
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jan 3, 2014, 12:07 PM
    If this is a closed combustion chamber type heater, check combustion chamber air filter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State select model es680dort? [ 1 Answers ]

I just replaced both upper and lower thermostat on the water heater because water was very hot(170degrees) it still is very hot no change whatsoever. The parts I used were state replacement parts.any suggestions? I decided to try the thermostats first as they were not to expensive.. Bob from...

Lighting issue [ 4 Answers ]

Hey When turning on a 2 way dimmer switch all the lights in my flat went out. I changed the fuse (an old fuse wire) which had blown with a like replacement but none of the lights will go on. Should I now investigate the actual swicth? Any advice would be appreciated

Lighting issue [ 3 Answers ]

All of the lights in one area of my house have stopped working. Strange thing is that all of the power outlets in the same area are still working. I have already checked the GFI switch and circuit breakers. Any ideas on what else it could be?:confused:

View more questions Search