 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I wire a thermostat, replacing Maple Chase with Hunter?
I have a Maple Chase 09520 thermostat that I am replacing with a Hunter 5-2 programmable thermostat model #44133. There are 7 wires for the Maple Chase and the slots they are in don't match the slots on the new Hunter. Which slots do I use for which wire? This is how it is wired in the Maple Chase:
White-->C Red-->R Yellow-->Y1 Blue-->E Green-->G Black-->W2 Orange-->O The Hunter has the following slots Rh Rc Y G W UNLABELED SLOT O B W2 Y2 UNLABELED SLOT A |
||||
Check out some similar questions!
Replacing maple chase thermostat with ritetemp thermostat model # 6030
I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...
I do not have a heat pump & am trying to inst. A m/c 09620 tstat. I currently have W Y G Rh Rc (Rh Rc jumper) the new tstat has C L R Y2 Y1 E G W2 O B Im unsure where the W wire goes. I have electric heat strips. I understand I must add a comon wire from the trans. To C for this tstat. One...
I have a Maple Chase 09520 thermostat that I am replacing with a Hunter Just Right thermostat. There are 7 wires for the Maple Chase and only 5 for the Hunter. Which do I use? And what do I do with the extras? This is how it is wired in the Maple Chase: Blue-->C Red-->R Yellow-->Y White-->E...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
