Ask Experts Questions for FREE Help !
Ask
    bobofettt's Avatar
    bobofettt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2013, 10:12 AM
    Honeywell CT87A
    My thermostat will not stop the call for heat, it is set for 62 but heats the house to 70. Is there an easy remedy to this?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Dec 29, 2013, 05:01 PM
    Frankly, I've had nothing but trouble with that thermostat. I suggest replacing it with something other than the 87 series. The 1000 series is the least expensive Honeywell digital & the few I have installed have worked well.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell [ 1 Answers ]

I'm replacing a 23 year old manual Honeywell thermostat with a new digital Honeywell thermostat model RTH111. The old thermostat has two wires (colors white and red) but no designation on the terminals. This is for a hot water baseboard gas fired boiler. Which terminals do these unmarked wires...

Replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Having trouble with wires [ 1 Answers ]

I'm replacing a Honeywell T8575D2003 with a Honeywell RTH8500. Didn't think there would be issues, manuals are all straight forward. However when I removed the T8575, the wiring set up did not match what the RTH8500 was expecting. The T8575 has 8 wires connected as follows < 1 ...

Installing Honeywell RTH6300B from an older 7 wire Honeywell. PROBLEMS [ 4 Answers ]

Hello everyone, I am new here. I found this site which trying to troubleshoot my problem. Any assistance would be GREATLY appreciated. Basically I have an older honeywell programmable thermostat with 7 wires attached. They are as follows... C - Black wire L - Blue wire R- Red wire W2 - brown...

Honeywell CT87A [ 9 Answers ]

I have the same problem as : https://www.askmehelpdesk.com/heating-air-conditioning/honeywell-thermostat-14250.html i.e.. The thermostat has the following terminal designations: (RH, RC, G, Y, W) I have the following colored wires: Red, Blue, Green, Yellow, White. I tried R --> Rh, B-->...

Replacing Honeywell T8411R with Honeywell RTH7500 - wiring problems [ 1 Answers ]

I need help getting my new, programmable thermostat to work. I currently have a dual-stage Heat Pump and A/C unit that works fine. The current thermostat is the Honeywell T8411R. I don't know the number for the subbase, but it's the one that came with the thermostat. The current (operational)...

View more questions Search