Ask Experts Questions for FREE Help !
Ask
    tjudge21's Avatar
    tjudge21 Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 8, 2007, 11:34 AM
    Upgrade breakers?
    I have two 20a amp breakers I replaced recently due to tripping off. They continue to do the same with the new 20a breakers. Is it time to upgrade to a 30 amp or is there something wrong with the wiring or the pool pump which is what these breakers operate?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Apr 9, 2007, 02:49 AM
    The circuit will need to be troubleshooted, using an amp meter to see if the motors are drawing more than normal. There may also be a short in the circuits. Better to check out the problem before upgrading the breakers to 30 amp, which would need all #10 wire be pulled.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Circuit breakers [ 16 Answers ]

I purchased and ready to install a new diahwasher. The instructions call for a 15 amp circuit breaker. The current breaker is a 10 amp breaker solely for the dishwasher. Can I use the 10 amp or should I change the breaker to 15 amp? How difficult would it be to change?

Breakers difference [ 1 Answers ]

Can I use a 30 amp breaker instead of a 20 amp breaker? The breaker keeps tripping when I use the sweeper and the portable electric heater off the same outlet.

Recepticals and breakers [ 1 Answers ]

How many receptical can be put on a 20 amp breaker? Also would it be okay to put lampost lights on a breaker that services my basement? The total wattage would be 1055 watt. Thank you, Don

Fuses v breakers [ 3 Answers ]

thought I'd look on the web for this and I found this site. Here goes... my building was built in 1939 and has old cloth wire in it. My neighbors have all had their fuse boxes upgraded to circuit breakers, and since I recently fried a wire inside a conduit while hanging a fixture, I thought...

Circuit breakers [ 2 Answers ]

I would like to up grade the amps going to my garage so I can run my saws and power tools with out dimming my shop lights. I currently have a old style fuse box in the garge feed with 12ga uf cable run off a 20amp circuit breaker in the service panel. My plans are to replace the fuse box with a new...


View more questions Search