Ask Experts Questions for FREE Help !
Ask
    delg's Avatar
    delg Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 19, 2013, 09:55 PM
    Goodman Gas Furnace Troubleshooting Codes
    Goodman gmh95 ind motor starts,glow ign glows gas valve does not open,code is light off which says control. I changed control board, same thing
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 20, 2013, 09:17 AM
    First thing is to check all the safety switches, high temp, roll out etc. I would clean or replace the flame sensor-I would have done that first as it is a common problem and about $15.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier furnace troubleshooting codes [ 0 Answers ]

Three short blinks and three long blinks I still have no heat.

Goodman furnace troubleshooting codes? [ 7 Answers ]

Have a goodman gas furnace it cycles through once and then makes a pop sound? It then gives a blinking code of 1 blink is this the gas valve?

Nordyne furnace troubleshooting codes [ 0 Answers ]

I have a Nordyne G5RC080C-16 gas furnace which had the blower fail. It was in A/C mode with the condenser still running but no blowerat the furnace/evap. A tech repakced the blow motor and capacitor -- still no blowe, even in direct 'fan' mode. There is a code (one flash) suggesting limit switch...

Goodman hot air gas furnace troubleshooting [ 0 Answers ]

I have a goodman gas furnacemodel gm075-3. The furnace and air conditioner work fine, but sometimes the forced air blower will start on its own without the heat or air conditioner turned on.

York furnace troubleshooting codes [ 1 Answers ]

Furnace seems to run normal, but every once in a while blower motor keeps running and I have to turn off ac switch to stop. Error code in memory, 5 red flashes. Rollout switch. Furnace will now run normal for a while, slow green flashes, then slow amber flashes when furnace is operating,...

View more questions Search