Ask Experts Questions for FREE Help !
Ask
    chickiee's Avatar
    chickiee Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Apr 7, 2007, 11:09 PM
    No heat repair man didn't fix
    Please advise me I had repair man come out to look at my unit because my wall aroung unit was getting hot and even with switch on themostat off I still heard humming or buzzing sound the only way to stop it was to cut it off at breaker switch. I finally got $ to get repair man out and he said my system was wired wrong and I needed a new thermostat but my system has worked fine for several years so I didn't understand why the man said it wasn't wireed correctly.. now the electronic thermostat is reading aux heat on but I have no heat comeing out of vents... my system in a in/out door unit coleman 3500a816/nordyne date stamp 1993... please help if you can I am a single mom... thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Apr 8, 2007, 01:51 AM
    If the repair man said you need a new thermostat he might just know what he is doing. Did your replace the original thermostat with a electronic one?
    chickiee's Avatar
    chickiee Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Apr 8, 2007, 08:22 AM
    Quote Originally Posted by chickiee
    please advise me i had repair man come out to look at my unit becuase my wall aroung unit was getting hot and even with switch on themostat off i still heard humming or buzzing sound the only way to stop it was to cut it off at breaker switch. i finally got $ to get repair man out and he said my system was wired wrong and i needed a new thermostat but my system has worked fine for several years so i didn't understand why the man said it wasn't wireed correctly..now the electonic thermostat is reading aux heat on but i have no heat comeing out of vents.... my system in a in/out door unit coleman 3500a816/nordyne date stamp 1993...please help if you can i am a single mom... thanks
    Yes he did he put in a honeywell proth3110d/th321od
    chickiee's Avatar
    chickiee Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Apr 8, 2007, 08:46 AM
    I had heat before he did the work the only thing was the wall got hot and I could hear buzzing sound and he said heat strips didn't turn off because it was wired wrong but it has always worked in past wired the way it was just since jan has the wall gotten hot and I had to cut it off at breaker to get the buzzing to stop and wall to cool off... it still is getting hot just not as hot
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #5

    Apr 8, 2007, 09:21 AM
    It is almost impossible to advise under this situation. I recommend you call the furnace man back and have him look into your situation.
    chickiee's Avatar
    chickiee Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Apr 9, 2007, 08:16 PM
    Quote Originally Posted by hvac1000
    It is almost impossible to advise under this situation. I recommend you call the furnace man back and have him look into your situation.
    Thank You For trying to help...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Man In Love w/ Another Man [ 11 Answers ]

:confused: Hey Im 33 yrs old I became fast friends w/ someone I have known for many years just did not know him personally. Hes 27yrs old very intelligent ,funny, tough, masculine and very very easy on the eyes but he also has severe mood swings(gemini) along w/ a severe drinking habit. As time...

NO HEAT! Janitrol heat pump and AC system. Changing to Lux Thermostat. Wiring issue. [ 11 Answers ]

I have a Janitrol A/C and heat pump system. I replaced the thermostat with a Lux T9000LC The A/C works fine, but the heater does not. I have it wired as follows: G - Green Y - Yellow W - White RH - Pink B -

Heat runs with ac and even auto kicks on emg heat [ 1 Answers ]

(Coleman Evcon) Some how the hot and cold on the inside thermostat switched.how is that possible?and how do I fix it?

No heat. How to fix it? [ 1 Answers ]

We have a Beckett Burner Model AFG50XN with a Honeywell R8184M1002 primary oil igniter. Its about 5 years maybe. The oil coming in isn't being lit. We have hit the reset button on the honeywell. That worked for a short time to get the fire going. But that method seemed to stop working. What are the...

Electric heat pump auxilery heat problem [ 4 Answers ]

Equipment: Trane XL1400 4 years old Auxilery heat: Strips... 2 -60Amp circuits Filters changed every 30 days I cleaned outdoor unit summer 2006, as every year. Thermostat: Honeywell Chromotherm II Problem: I have been noticing at times the aux heat kicking in at times I think it should not....

View more questions Search