Ask Experts Questions for FREE Help !
Ask
    Tina P's Avatar
    Tina P Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 8, 2013, 10:47 PM
    How to wire a thermostat to a evcon coleman furnace and air conditioner?
    I need a diagram on how to wire a thermostat for a evcon coleman furnace and air conditioner. Model number#DGAT07580C. My thermostat has four wires, and the furnace has four also.The wires are not the same colors.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Dec 9, 2013, 04:28 PM
    What colors of wire do you have where? Is there no diagram on the furnace?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you hook up a thermostat in a coleman evcon air and furnace? [ 6 Answers ]

My air was not working so I called a repairman that works on mobile homes and he replaced the main circuit board And got the air working( $310 ), $180 FOR THE BOARD ONLY. After a few days I noticed the blower cycleing on then off many times while the air was running.I did not think it did that...

Coleman evcon furnace and air thermostat change? [ 2 Answers ]

I have a Coleman 3500-812evcon model # furnace. It has a rocker switch on top of the blower. Heat, off, cool. Its an 89 model trailer. It has a Coleman mercury bubble thermostat now two wire red and white. No switches. I have a programmable thermostat. How do I hook this up? And where do I put the...

Coleman Evcon furnace models number CGH10016D? [ 0 Answers ]

Now when it starts to work, I heard it works for about 3 to 4 minutes and it will stop of 3 to 4 seconds and starts to work again for 3 to 4 minutes again stop working for 3 to 4 seconds; it will work like this for about 40 minutes to get to the set temp. But before, it will starts and non-stop...

Coleman evcon furnace model # EB178 [ 3 Answers ]

When I turn the thermostat in the auto side nothing happens but when in the manual (ON) position the furnace works. What do you think my problem is. I replaced a blower relay that was humming but that didn't seem to do the trick.


View more questions Search