 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace isn't working: 4 red flashing lights
Hi!
My furnace, an OLSEN GTMA070-3, is not working. There is a red light that is flashing. It flashes four times and then stops, and then the cycles repeats itself. I have looked on the internet and it says that it means Open Temperature Limit Circuit. I am not sure as to what this means and how I have to go about fixing it. If someone could help it would be greatly appreciated as it's like -10C outside and it is going to get colder. Thank you in advance |
||||
Check out some similar questions!
I went to run the machine, pushed the button and it wouldn't turn on. I noticed the door hook seems cracked and loose, could this prevent machine from turning on?
I have a baxi 105e boiler and had a new diagphram fitted about a month ago boiler has stopped working and a red light flashes on the front, hand book says faulty diagphram but neither C/H or domestic hot water works please can you help me Thank you Tony
I've read every post on this thread. I haven't been able to find the right combination. Mine is a Kenmore Ultra Wash Quietguard 1, model number 15632000. It has different button names than any others I've seen on this thread: CYCLES Pots/pans; normal wash; water miser; light wash; quick rinse...
My furnace will not blow anything out, red light flashes @ where the theremostat wireing box on the furnace is. It says my attic fan is not working.
I have a 5 year old bryant furnice. Red lights are flashing, room is cold and there is a bad smell. What could this be?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
