Ask Experts Questions for FREE Help !
Ask
    cloer316's Avatar
    cloer316 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2013, 07:52 AM
    Switching from old janitrol thermostat to honeywell RTH6450
    I am switching from a Janitrol 18-60 to a Honeywell RTH6450 and cannot figure out where the W2 wire goes. I have an E ( which is black ) in Aux/E. W2 is Aux as far as I know. Do I place W2 and E in same slot or what?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 29, 2013, 06:22 PM
    What were the terminals & wire colors on the old stat?
    What are the terminals on the new stat?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Janitrol to Honeywell/ thermostat [ 1 Answers ]

I need to know which wires control which function.

Help switching out Trane thermostat w/Honeywell [ 2 Answers ]

My Trane XT500C thermostat has bitten the dust, and I'm replacing it with a Honeywell VisionPRO 8000 (model #TH8320U1008), the model Trane said is the proper replacement for the XT500C. The current wiring to the XT500C is as follows: B - Blue H - {no connection} H - {no connection} OT - {no...

Honeywell thermostat heat pump wiring? For RTH6450 [ 0 Answers ]

The old thermostat was Ritemp brand I have 7 wires black, white, {grey marked C} orange, yellow, red, and a light blue. Can you assist me with a wiring diagram. Thanks Vince

How do I connect wires from Janitrol to the Honeywell Thermostat [ 1 Answers ]

How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected

Replacing Janitrol Thermostat with Honeywell Thermostat [ 1 Answers ]

I am attempting to replace my manual Janitrol Model HPT 18-60 thermostat with a Honeywell Programmable Model CT3500 thermostat. My Heat Pump is a Trane TWR012-042C The 6 wires connected to the Janitrol thermostate are: Y, W2, G, R, O, C How do I connect these six wires to the Honeywell that...

View more questions Search