Ask Experts Questions for FREE Help !
Ask
    born2build's Avatar
    born2build Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 29, 2013, 01:55 PM
    Why would my e2eh 015ha intertherm furnace blower will not come on when set to auto h
    Blower will not come on when set on auto. Unit heats up and shuts right back off but blower never come on unless it is set to on position but there is no heat when ran in on position. What could be the problem?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 29, 2013, 02:52 PM
    If the furnace has a control board, which it probably does, the fan relay on the board is likely bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Nordyne Intertherm FEHB-015HA furnace circulation fan runs continuously. [ 0 Answers ]

I have a Nordyne Intertherm FEHB-015HA furnace. The circulation fan will not shut off. The thermostat works properly and kicks the elements off as it should, but the fan continues to run. There is a fan switch on this unit that can be set to auto or off, but it will not turn the fan off. The only...

Can I oil my intertherm blower motor 2002 e2eb 015ha [ 0 Answers ]

Can I oil my intertherm blower motor 2002 e2eb 015ha

Nordyne Electric Furnace model# e2eh-015ha will not heat? [ 0 Answers ]

My blower runs continusly but will not heat. Only blows cool air even if thermastate is set on heat.

My Intertherm heat pump furnace will not kick on Model no. E2EB-015HA [ 0 Answers ]

A few days ago the heat would not kick on so we turned it off and on at the thermostat a few times and it finally kicked on and worked fine for about a day. Then the same thing happened again. We then did the same thing by turning the thermostat up and down until it finally kicked on. The next day...

AC , Furnace, and Blower not turning on w/ thermostat set to Auto or On. [ 20 Answers ]

Here's my issue. I cannot turn on either my AC, Furnace, or Blower from the thermostat. However, I can turn on the blower by manually pressing a 'Manual On' button inside the furnace. - AC is powered and was working a couple days ago. - Furnace was also working a couple days ago. - Found...

View more questions Search