Ask Experts Questions for FREE Help !
Ask
    Rowi90's Avatar
    Rowi90 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 24, 2013, 05:56 PM
    Thermostat turns on air handler but not boiler. Other zone work fine.
    This one zone thermostat will not turn the boiler on. Hot air seems to flow if other zones have turned on the boiler. Two zones work, one does not.

    What should I look at to troubleshoot this issue?

Check out some similar questions!

I have air handler with boiler [ 0 Answers ]

I have air handler with boiler,termostat with wires R,W1,W2,G,Y,C.W2 energice valve but I don'd know is this a bleed valve or unsulate valve.all works fine but when I connect W2 it bun out transformer soon I connect or 1 hr later

Air handler works fine but compressor will not shut off. Air is cold. [ 1 Answers ]

I noticed the floor was very cold at the airhandler closet. A coils are clean in airhandler and I replaced the filter.My outside compressor just keeps running without stopping.Airhandler seems to be cycling on and off like it should.

Furnace won't turn on. Thermostat and zone valve work fine. [ 4 Answers ]

I noticed that my thermostat works fine and opens the zone valve for the basement. The problem is that it won't send a signal to the furnace to turn on and heat the water. I have no problem with the upstairs zone valve. It opens and turns on the furnace. Is this a wiring issue? Thanks...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.