 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Maple chase thermostat
The temp is currently 71 inside-- I adjusted desired temp to 65 a half an hour ago and the furnace is still going. Sometimes heat blows, sometimes cool. This has been happening all night. I can't locate the reset button. Unit is at least eight years old. Batteries seem OK-- no LO BATT message. Normally unit will click on/off with desired setting change but not now. I just turned unit on for the first time 2 days ago. Any tips? Thanks.
|
||||
Check out some similar questions!
Our thermostat read low battery - I don't know for how long.. I started to replace the batteries and the furnace/ac unit started. I thought I had the correct settings according to the back panel. I've replaced the batteries - no readout on panel. I've pressed the reset button on lower left of...
How do I stop my maple chase thermostat from resetting it self to 70 degrees at night?
Replacing maple chase thermostat with ritetemp thermostat model # 6030
Replaced the batteries several times, but it keeps saying Lo Bat. Pushed the reset button and the display changed to show the temperature, but the heat does not come on. Tried setting the fan to ON, so now it is blowing, and set the program to Manual and pushed the up arrow to raise the...
Our Maple Chase thermostat is about 7-8 years old and recently, it seems to be reading off the wrong house temperature. Last night, the thermostat was reading 75 degree F but the house was too cold to be anywhere near the temperature. So my husband raised the temperature to 76 degree F and...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
