Ask Experts Questions for FREE Help !
Ask
    dragoon's Avatar
    dragoon Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 2, 2013, 12:24 PM
    Wiring for Gemini 5000 wood furnace
    I have recently inherited a Gemini Systems inc. Model 5000 wood burning forced air furnace add on which I plan to heat a garage this winter with. I also have a natural gas furnace in the garage which I plan to be my backup for when the fire goes out. The unit has two Honeywell L4064 Fan limit switches. One is 120v which I assume controls the blower motor, the other has had the tab removed for 24v which again, I assume controls the draft motor from the thermostat 24v through the Honeywell Fan Center, model R8239A with the R8222B relay. The wiring is disconnected at so many points that I have no idea what paths are what. I've searched the net but the only thing I can come up with on this is the patent. The patent was dated 1980 so it's fairly old. Is there anyone out there that would have a manual or wiring schematic of this or be able to help me in figuring out how this should be wired?

    Thanks
    Rich
    afatdog2's Avatar
    afatdog2 Posts: 1, Reputation: 1
    New Member
     
    #2

    Nov 21, 2013, 11:21 AM
    Rich I have a gemini 5000 in the garage, I just saw the books on it, do you need all the wiring diagrams? Jerry

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need wiring diagram for Old Jensen wood furnace [ 2 Answers ]

I have an old Jensen wood furnace with a Honeywell limit control, a draft induced fan , and a blower fan that I need a wiring diagram or some assistance in. Thanks for any help you can give me.

Blower motor wiring for wood furnace [ 1 Answers ]

Would like to know how to wire my wood furnace(Hotblast 1557M) with twin 550 cfm blowers, to my gas furnace blower for some circulation assistance when the wood stove blowers cycle. Also, when gas furnace is needed; would just like it's blower to operate on it's own. Is this possible? Wood stove...

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Wiring themostat to wood/furnace [ 2 Answers ]

Hey there trying to wire a themostat to a newmac wg-100 wood/coal furance I live in what use to be a duplex home, converted into one living area. Theromostats are summaire 1 upstairs has red white green and black wires, down stairs has black and white wires. The furnace has a fan draft on it,...

Outdoor Wood Furnace Second Thermostat Wiring [ 1 Answers ]

I just installed an Outdoor Wood Furnace and need help with wiring the thermostat. My indoor furnace is a Trane Gas Furnaceand A/C. I am trying to wire a second thermostat to the blower on the gas furnace so I can just run the blower. The Trane thermostat wires are W,R, Y, and G. I installed a...


View more questions Search