Check out some similar questions!
I replaced hampton bay three-speed fan switch, now fan is on high speed or low no off
[ 1 Answers ]
I replaced a Hampton bay three speed fan switch I put Black onL, Grey on 1, brown on 2, and purple on 3 and now fan only works on high and low after a couple of pulls no off or middle speed.
Can you hook up the high speed wire to the medium speed wire on blower fan
[ 20 Answers ]
My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow
Old GE furnace with 2-speed blower fan and A/C
[ 4 Answers ]
I have old GE furnace (gas/central model 21LU105D2M1) with 2-speed blower fan (blue,red & white wires) Heating work good, low speed first & after warm up high speed. Problem is with A/C. Seems like its work always on low speed. On low speed air flow is to weak to cool down 2nd (top) floor. I...
Old GE furnace with 2-speed blower fan and A/C
[ 0 Answers ]
I have old GE furnace (gas/central model 21LU105D2M1) with 2-speed blower fan (blue,red & white wires) Heating work good, low speed first & after warm up hi speed. Problem is with A/C. Seems like its work always on low speed. I try to take out red and blue wire from relay, and put blue wire...
Air conditioner, blower fan speed with carrier furnace
[ 2 Answers ]
The fan speed does not adjust when the air conditioner is on . Is this normal ? If I turn the set temp up high enough the air conditioner turns off and the adjustability returns. Auto, low, medium and high all work. When I set the temperature back down so the air conditioner turns back on the... View more questions Search
Add your answer here.
|