Ask Experts Questions for FREE Help !
Ask
    hogman1's Avatar
    hogman1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 20, 2013, 09:44 AM
    1991 chevy pickup sits two days will not crank pour gas in throttle body cranks
    When sits about tow days will not crank until you pour a little gas than cranks up and runs fine.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Nov 21, 2013, 06:39 AM
    The Ignition Control Module (ICM) may be failing. I recommend replacing them every 125,000 miles or 10 years, whichever comes first.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have no spray out of the injectors on 1990 chevy truck 350 throttle body [ 13 Answers ]

I drove the truck in the garage and removed the engine. I had two bent valves. I removed the engine, had it rebuilt, and put it back in the truck. I tried to start it and no spray from the injectors. I can pour fuel in the throttle body and it runs. I have checked and replace the ignition module,...

What would make a 1991 chevy corisca not crank? [ 2 Answers ]

It turns over but won't catch. It is almost like it is not getting gas but it smells like it is flooded. It is a 3.1 multiport fuel injected

Briggs and stratton will crank only when I pour fuel in the air iintake [ 2 Answers ]

13 hp Briggs will fire & crank if I pour fuel into air intake. I stops as soon as fuel in the intake is gone (just a few seconds). Replaced fuel lines, fuel pump, filers. Sprayed two cans of carb cleaner into and through the carb. It seems there is no pump pulse to the fuel pump. Any ideas?

1991 Honda Accord --> No Spark, after cleaning throttle body - [ 1 Answers ]

85k original miles, just bought the car. Was cleaning the throttle body with TB cleaner and I sprayed too much, which I think flooded the engine. I tried to run it to burn away the access fluid but it stalled after 8 seconds of being on. I let the car sit for a day in an attempt to dry out the...

1991 Honda Civic Throttle Body Replacement [ 15 Answers ]

Mechanic replaced my old throttle body with a lightly used throttle body. ALso installed a new O2 sensor. ECU is still throwing an error 7 & 15 and the car continues to stall at lights and sputter in 1st & 2nd gear. Runs great on the highway and around town but when you stop you got to keep the...

View more questions Search