Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Utility Sink Installation
[ 1 Answers ]
I would like to install a utility sink in my laundry room. Currently, my washer drains into a standpipe, and I would like the sink to be a simple drainage station with no faucet, with the washer draining into the sink. I will call the local plumber for this project. My first question is, what...
Stink from utility sink
[ 1 Answers ]
Stink from utility sink
Extending utility sink drain for bar sink
[ 2 Answers ]
I have a utility sink in my walk-out basement - that sink's 1.5 inch drain connection is approx. 18" above the floor, into a two inch horizontal run. This 2 inch horizontal PVC runs about 3 feet, then connects to a main 3" DWV. I would like to add a bar sink, set into a standard height (36")...
Removing utility sink
[ 1 Answers ]
I will be removing a utility sink and cabinet and will not be replacing it. My question revolves around the drain coming out from the wall.The water lines have shut off valves which will remain in place in case the utility sink were to be needed at a later time so they are not the issue. Can I...
Adding a utility sink
[ 1 Answers ]
I am planning on adding a utility sink to my laundry room, I was planning on tapping into the water lines and drain to the washer. I have not opened up the wall yet so I don't know the exact configuration of the drain, but my question is if I run the sink drain of off the drain from the washer... View more questions Search
|