Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
J-Pipe leaking where PVC meets metal ?
[ 1 Answers ]
In my kitchen I have replaced everything with PVC, for the most part, and it's working fine. I am having issues where the J-pipe (PVC) meets metal. I am leaking there despite many attempts at re-seating the pipe and trying again. It is a very difficult connection, and turns hard. It takes a...
Water pump/witch is better pvc or metal pipe
[ 3 Answers ]
When I Install 1 1/2 horse power submersible water pump at 100 Feet.witch would be the best to use pvc pipe or metal pipe
Joint between 1-1/4" metal drain pipe and 1-1/2" PVC pipe into P trap
[ 5 Answers ]
In replacing a broken drain pipe in bathroom sink, I discovered that the original plumber used plumber's putty to seal the join between the 1-1/4" metal drain pipe and the 1-1/2" PVC pipe leading to the PVC P trap. I know not to use plumber's putty on PVC, but since two different sized pipes were...
How do I remove cemented pvc pipe from cast iron hub?
[ 7 Answers ]
Hi, I am doing a bathroom remodel and this includes moving the toilet to the opposite side of the soil stack from where it is now. I have read all about using Fernco donut etc. to install a new PVC pipe into my cast iron hub but the problem I have is that the current PCV pipe that is attached...
Plastic PVC Broken in Metal Pipe Joint
[ 2 Answers ]
Was digging in the yard and broke the PVC pipe connected to a metal pipe inside the joint. The PVC and joint is 3/4 inch however the PVC is glued inside the metal and now I can't get the old PVC out of the metal joint to replace it. I don't have any tools to cut the metal pipe. Is there anything... View more questions Search
|