Ask Experts Questions for FREE Help !
Ask
    Dougmick's Avatar
    Dougmick Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2013, 09:47 PM
    Wiring a barn
    I am running underground wire to barn approx. 450 feet. Will have 3 light fixtures & 4 recepticals. What size wire is recommended ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Nov 12, 2013, 10:16 PM
    Are you planning a sub panel? Your question can't be answered as posted since we have no idea what you plan to plug into the recepticals. What will be the load? Small drill or a welder? -makes a big difference! 120 and 240?
    Dougmick's Avatar
    Dougmick Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Nov 14, 2013, 01:16 PM
    Quote Originally Posted by ma0641 View Post
    Are you planning a sub panel? Your question can't be answered as posted since we have no idea what you plan to plug into the recepticals. What will be the load? Small drill or a welder? -makes a big difference! 120 and 240?
    I was not planning a sub panel, do you recommend installing one ? The recepticals are more for convinence. During the winter months there will be two water tubs that draw 100 watts each to keep the ice off the water. I was planning to run 12/2 wire from a 20 amp breaker in the house. If I used a sub panel what size wire would I run from the house? And what size wire from the subpanel.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    Nov 14, 2013, 02:07 PM
    You are going to have a very hard time with a 12 @120. Voltage drop is 18%, way too high. Even #8 is borderline @120VAC. You need to consider running 240 volts to a small subpanel, double 30 Amp at the house, 10/4 UF to the subpanel and then 12 from there. Even that is probably good for just 10-15 Amps.

    Voltage Drop Calculator is a good tool to show you exactly what you need.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a barn from the house panel [ 1 Answers ]

I have a 200A panel in the house and I want to install another 200A panel in the barn. Do I need a breaker box next to the house panel and where do I connect it, the meter? I have 200 feet of 2 inch conduit buried 3 feet, going out to the barn. What size aluminum wire do I run to the barn panel?

Barn Wiring Questions [ 10 Answers ]

I know all this is wordy but would appreciate someone in the know looking it over. We have a real stickler electrical inspector and want everything to be code. Thanks in advance. I wired my barn without a permit and now want to get a permit. I thought I would explain how I wired it and ask...

Wiring my barn using a 125 amp subpanel. [ 5 Answers ]

I have a 200 amp feed through panel about 40 feet from my barn. The 200 amp feed through main panel feeds my house. The house uses a 100 amp main. I want to install a 125 amp sub panel in the barn and put the main breaker in the feed through panel. Can I do this without having a main...

Wiring up a barn [ 1 Answers ]

I don't have a code book but I was wondering do you have to use conduit when wiring a barn or can you use m\c cable?

Shed/Barn wiring [ 2 Answers ]

I've got a decent sized shed out about 150ft from the house, I plan on running the cable underground in conduit. But I am unsure of what style/size cable I need to use for a 50A circuit 220/240V. I'm assuming that I probably need to use service entrance cable and can't use 6G stranded. I've tried...

View more questions Search