 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I hooked up a 75,000 BTU heater in my garage last weekend and at first everything worked fine. Later, I heard the heater running, even though the thermostat was in the off position. I called Honeywell and we concluded the thermostat was bad. Got a new one, installed it, and everything was fine...
After just one winter of use my heater quit working when it calls for gas, gas came on but it would not ignite so I replaced the igniter, still did not work so I called a repair man he told me that the control board was bad so now I have a heater that is two years old that I paid approx 650 dollars...
45K BTU garage/shop heater. POS from day 1. I have replaced the ignitor, now after reading the book(AGAIN) the 4 flashes indicates that either my Roll Out Switch or Hi Limit Switch need to be reset - my question is this. What type/amount of resistance should I measure on these two switches to...
I am installing a beacon morris bru 45 heater. Looking for some advise on running the flue. Through the wall or the roof. And how to finish off if I go through the wall. Its vinyl siding
Hello I just purchased a Beacon Morris garage heater. It is a BRU-75. I was wondering if anyone could tell me where I could purchase a thermostat for this particular model. I want to have a switch on the thermostat that will let me shut off the unit when I don't want it to run. I don't want to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
