Ask Experts Questions for FREE Help !
Ask
    sunnyacres's Avatar
    sunnyacres Posts: 13, Reputation: 1
    New Member
     
    #1

    Nov 6, 2013, 02:54 PM
    Poulan Chain Saw
    I have a Poulan 2150 2.1 C I Woodsman gas powered chain saw. Was running pretty good one day and about a week later I can't get it started. Plug is good, gas filter I replaced, also air filter. I prime it as instructed. 6 pumps on the bubble, pull choke out and set trigger switch. Pull 5 times, release choke and pull until it starts. Runs about 10 seconds and stops. As I repeat process, same thing happens. If I don't repeat process I can't even get the saw to run for 10 seconds.
    Any help on this? Thanks.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Nov 11, 2013, 03:45 PM
    Hi,
    Sounds like carb, suspect the inlet screen first, and the metering diaphragm second.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I've got a poulan 14.5 hp 42 [ 1 Answers ]

I have a rideing lawn mower that is by name poulan it's a 14.5 hp has a 42" cut the problem is that it will run for awhile then it stops and may start up the next day

Fan stopped working with remote/pull chain; light still works with pull chain. [ 1 Answers ]

Hampton Bay Tahiti Breeze with light kit, Model 344 476; remote control, model UC7083T; & pull chains. Fan/light worked till last night; now fan does not work either way. Light works with chain. Checked electrical switches; okay. Tried replacing battery in remote, but no difference. Try to...

Chain saw chain slippage [ 8 Answers ]

When using a chain saw, how can I stop the chain from slipping out of its groove?

Poulan mower [ 3 Answers ]

I have a poulan riding mower that will not start. I have put in a new air filter, spark plug and battery. There is a cable that is on the side, not sure what that goes too. Is it to the fuel line is so how do I fix it, if not why won't it start.


View more questions Search