 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Honeywell thermostat with RGBW wires
I have red green white blue wires.
My Old thermostat that I replaced I managed to get the unit to work with blue on y2. Red on rh. White on w and green on g. Problem I had was unit would kick off and right back on. Not sure if this was thermo when temp dropped/increased by degree or not. New thermostat: honeywell wifi I must have the blue to common and red to R for the unit to power up. Which only gives me white/green and that powers the fan and heater. Wired this way the ac does not operate only the fan. Any ideas? Also the unit is in a 3bed home. Gas heat. Elect. Ac |
||||
Check out some similar questions!
Need to know if these wires need to be used
How do I connect the wires from a Janitrol to the Honeywell RTH7500 Thermostat. I have the following wires: R Red Y Yellow G Green O Orange W2 White E Beige/Pink C Blue Black wire not connected
I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated
I was painting my wall and I decided to remove my thermostat off the mounting plate, after I finish I put it back but it didn't work anymore, so I check the wires and noticed a black wire that was loose, all the other wires were in place, so I tried to tight those but a think I accidentally touch...
My old thermostat was janitrol HPT 18-60 and wires were: Y (yellow) G (orange) R (Red) O (orange) W2 (white) E (Black) C (Blue) I just bought a Honeywell #RTH6300B. Their wires are: G,W,Y, R,RC. How can I match them up? Do I need the "O" on the old one? We are only getting hot air now by...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
