Ask Experts Questions for FREE Help !
Ask
    br5499williams's Avatar
    br5499williams Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2013, 09:15 AM
    Blower not coming on
    My blower on my intertherm model 4186900 tries to come on but won't fully kick on. The burner comes on but that is all. What could be the problem?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Nov 9, 2013, 05:54 PM
    With the power to the furnace turned off, try to turn the fan by hand. If it is difficult to turn, the motor bearings are probalby bad requiring a motor replacement. You should be able to spin the fan easily with your finger.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blower motor not coming on [ 0 Answers ]

I have an older electric Colman furnace and the blower will not come on automatically anymore

Furnace blower coming on and off [ 0 Answers ]

I have a Lennox gas furnace with central AC. I just lit my pilot and thought it was working fine, but noticed my furnace blower was coming on and off prior to the temp getting to the set temp to ignite the heat. When the temp does reach the set temp my burners light followed by the blower. The...

Blower not coming on [ 4 Answers ]

Furnace clicks on from tstat but blower will not come on even if tstat turned to on. Can't find problem

A/C blower not coming on [ 5 Answers ]

I have verified that the thermostat is working, but cannot get the a/c to turn on. The outdoor unit appears to be OK, and the cooling lines into the house are cold, I can hear the electrical system "humming" but the blower will not turn on. I turned the system to heat and the blower DID kick on,...

View more questions Search