Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Well water running light brown. Running cold water for 15 min. helped a little.
[ 3 Answers ]
All my taps are running light brown. I have well water. I ran the cold water for 15 minutes and that helped a little. What should I do?
Wood Repair of Fascia Board
[ 4 Answers ]
Piece of wood is unmovable. Only edge of wood is careworn. Some have suggested Glazing Compound, Glazing Putty and wood dough. After it dries, you can sand it. Your thoughts?
Fascia board cutting?
[ 1 Answers ]
The fascia boards,banana cut look, on my house are nailed to rafter ends that are cut square to rafter. This creates a compound angle at butting ends at the inside/outside corners. How do I cut these?. David
Prevent rot in ends of board and batten siding
[ 2 Answers ]
What casn I do to prevent rot in the ends of my board and batten siding? The boards and battens will rest on a concrete slab, so moisture could "pool" against the wood. Is there something I can apply to the ends before they are put up? Thanks. JJB
Fascia board bevel cut not joining
[ 2 Answers ]
Bevel cuts not lining up at the corners. After being cut by saw the two pieces lined up. 45"bevel cut. But upon installation on the house. They do not join correctly. Do I need to shave off one board.25876 View more questions Search
|