 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
On a ct30 honeywell thermostat which wire to I connect for a gas fireplace
Ct30 thermostat only has settngs for gas or oil furnace .04, electric furnace .3 high efficiency furnace .8, hot water system .8 and gas/oil steam or gravity system 1.2.
I have a gas fireplace and was wondering which setting I should use |
||||
Check out some similar questions!
I recently bought a new home that has a Napoleon GD 33NR Gas fireplace in it. This is controlled by a regular light switch (on/off -two wires, black and white). I am trying to connect a Honeywell RTH5100B Digital thermostat (millivolt capable) to it instead of the switch so that while we are in...
I installed a new ceiling mount air handler 7.5 kw goodman 1.5 ton it has 5 thermostat wires coming out... green,red,white,blue,brown... my thermostat wires from my thermostat has 4 wires of red green white yellow... and my condenser unit outside coming in has 2 wires red and green,, and my...
My old thermostat was a honeywell CT3611. I bought a new Honeywell RTH6350 programmable thermostat and cannot figure out where to connect the gray and blue wires coming from the wall. There is also a red yellow green and white wire. The old thermostat has C, E, W1, E, L and B terminal...
I had to remove our gas fireplace for some renovations and now I have reinstalled the fireplace the flame come on but not the fan. I notice the little red connector had come off and he put it back on without the red connector but the fan is not working... any suggestions would greatly be...
The white and black wires from the gas fireplace connect to what terminals on the thermostat?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
