Ask Experts Questions for FREE Help !
Ask
    clivedcampbell's Avatar
    clivedcampbell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2013, 08:59 AM
    Rtm3 sink and tub fixtures
    About 17 years ago, I bought sink and tub fixtures that have a picture of a little faucet on them and the identification rtm3. I think that they are Italian-made. Anybody know which company made them and if they are still in business?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Oct 24, 2013, 10:12 AM
    Contact home for FRtm3 contact | © 2012 Amirow L| © 2012 Amirow L
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Oct 24, 2013, 04:42 PM
    In doing a little research here, this appears to be an aquasource faucet... located in Montreal, Canada.

    Here is a link to their company:

    front page - aquabrass.com

    Good luck!

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace fixtures in a drop in tub [ 2 Answers ]

I have a 2 person drop in tub with jets. All fixtures need replaced . The jet covers, faucet, handles etc . I cannot find a manufacturer name or brand anywhere. A plumbing supply company told me without this information they couldn't help. There is a access panel in garage ceiling but cannot see...

Changed shower/tub fixtures [ 5 Answers ]

Hi this is my first time. I retiled my shower and got down to the shower and tub fixtures when I ran into a problem. I already threw away the old faucet fixtures so I had no idea what the brand was. I went to purchase new backplate and spout and they didn't work. I went to a plumber supply store...

Tub won't drain, other fixtures are fine... [ 5 Answers ]

We've a full bath (combo shower/tub, lav and toilet) where the tub either does not drain at all, or will take 48 hours to finally go down (when aided by chemicals I know I should not be using). The lav and toilet have no flush/drain problems, so I'm not thinking it's a bad vent situation... could...

View more questions Search