 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I am trying to replace a 5 amp fuse in my air handler but keeps blowing, any ideas?
My 5 amp fuse blew in my Carrier air handler several days back. I replaced it and the unit ran fine for a day. It blew again and now every time I attempt to put a new fuse in it I get the same result. Any ideas?
|
||||
Check out some similar questions!
We came home yesterday to a 90 degree house. It was 95 degrees here yesterday and my husband left the setting at 72 degrees all day. I'm not sure if this had anything to do with the problem, but we thought it may have frozen/overheated the Carrier system (approx. five years old) during the heat...
I worked on this unit for the last few days. I came in and replaced a blown fuse. Unit ran for a day. Now the fuse blows instantly as soon as power goes to unit on both cooling and heating. I disconnected ever wire but the c to the t stat then when I try to add the are power wire it blows the...
Goodman split unit, control board has 3amp fuse which blows when a/c is turned on. Replace fuse keeps blowing. I jumped the fuse and blew what I believe to be the transformer. Is this a low voltage wire short somewhere? The blower motor does not kick on even when I jumped the fuse, just a slight...
Carrier indoor air handler keeps immediately blowing 5 amp fuse. Changed contactor on the outside unit and turned on the breaker and air handler fan came on. Went to thermostat selected a/c and compressor came on turned it to off and compessor stopped but air handler fan won't. Made sure fan was...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
