Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to install gravity drain for an ice machine
[ 1 Answers ]
I would really appreciate it if someone can give me detailed information on "How to install gravity drain for a residential ice machine?". The information I have is: 1) Standpipe should be 1 1/2" in diameter and rise about 2" above floor line. 2) There must be a 1" air gap between the drain...
Kenmore refrigerator ice machine doesn't
[ 2 Answers ]
Ice maker makes ice, water dispenses, but machine won't grind ice or dispense cubes
SCI-120A Korean ice machine
[ 0 Answers ]
I'm working on a SCI-120A the owner said that it does not work and the water gets hot that is sprayed on the evaporator. I found that the fuse holder has a main power come into it and a wire(from the fuse) that goes to the fan which goes through a pressure switch. The wires were disconnected from...
Manitowoc ice machine 1804 series
[ 11 Answers ]
Been having problems with this ice machine. Took it into a vacuum (500 microns) and added specified amount of 404A refrigerant. Energized machine and she pulls down to about 60 psi on the low side and about 320 on the high side. It is supposed to run about 20-40 on the low side and 220-280 on the... View more questions Search
|