Ask Experts Questions for FREE Help !
Ask
    gentrycl's Avatar
    gentrycl Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2013, 12:05 AM
    Heater will not ignite
    I have a coleman evcon direct vent forced air furnace (gas with electric ignition). The motor runs, but it does not ignite. The blowers work fine on fan mode but will not ignite or blow on auto. Any suggestions?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 19, 2013, 04:47 PM
    Are you getting any kind of error code & if so, what is it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heater will not ignite [ 0 Answers ]

Circuit board blinks 3 times indicating faulty pressure switch or clogged vent. I changed pressure switch with a running HVAC system, checked the vent & inspected the H S I element Vent blower comes on about 20 seconds then system shuts down with self-diagnostics light blinking 3 x’s. What...

Gas wall heater will not ignite [ 2 Answers ]

My gas wall heater will sometimes not ignite. The pilot light is lit and when I turn on the heat I hear the themostat engage. However, the heater doesn't always fire up. When it does, sometimes it turns off prematurely after a few minutes. I don't want to spend $100 on a house call if it's a simple...

Heater won't ignite [ 2 Answers ]

I have a Rudd self contained heating and air conditioning heater. When I call for heat the electronic ignition does not ignite the burner tubes. I smell gas then everything shuts down. What do I do? Rich

Monitor Heater will not ignite [ 1 Answers ]

Where do I start to narrow down the problem? Or what might the obvious problem be? Thank you, Lisa

My heater won't ignite [ 2 Answers ]

My heater won't ignite sometimes, what should I do?

View more questions Search