Ask Experts Questions for FREE Help !
Ask
    Themom101's Avatar
    Themom101 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 15, 2013, 12:38 PM
    My Whirlpool Dishwasher DU1055XTSB2 won't start
    I have a Whirlpool Dishwasher (Mo: #DU1055XTSB2) that won't start. When I start it, it will fill but then starts buzzing and won't go into a cycle. It will cancel/drain though.
    I have tried 2 different wash modes, checked breakers, and tried letting it sit for a while before trying again.
    Any assistance will be greatly appreciated!
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Oct 16, 2013, 05:40 AM
    You probably have a bad or hanging float switch. Check first to see that it moves freely. You will have to check the different switches and safeties with an ohm meter with the power turned off. Here are some manuals:
    https://dl.dropboxusercontent.com/u/...dishwasher.pdf
    https://dl.dropboxusercontent.com/u/...ishwashers.zip
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool dishwasher won [ 0 Answers ]

I have a Whirlpool Quiet III dishwasher that will not complete the washing cycle every time. Is there anything I can check or replace to get it going again?

Whirlpool dishwasher start button flashing [ 0 Answers ]

Hi My whirlpool dishwasher ADP6515ix start button flashes 7 times pauses and then falshes 7 times again - is not doing its wash cyccle - any idea what this could be

Whirlpool dishwasher model # DU 1145 will not start [ 0 Answers ]

I have a whirlpool dishwasher model # DU 1145 all lights work except start light and it will not start in any cycle. The door switches check OK. What could be the problem?

Whirlpool dishwasher won't start [ 1 Answers ]

Hello - I hope someone can help me. I have a Whirlpool dishwasher Quiet Partner 980 series (about 11 yrs old) and it will not start. The control panel lights up and can be put in diagnostic mode per the schematic instructions. Cycling through the sequence does nothing except change the lights on...


View more questions Search