Ask Experts Questions for FREE Help !
Ask
    LizTabler's Avatar
    LizTabler Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 15, 2013, 04:51 PM
    Motion lights
    The motion lights I have mounted above the garage will just blink on then stay off. How do I fix this problem?
    xx-man's Avatar
    xx-man Posts: 37, Reputation: -1
    Junior Member
    		  
    #2

    Oct 15, 2013, 09:40 PM
    Most motion sensor lights have two dials or some type of apertures to control the length of time the light stays on and the sensitivity of the motion detected. Every motion sensor light I have ever owned,and that has been many, I have had to turn the light on for a certain length of time then turn it off, then on quickly... some have even had a slight tap or click that can be heard as it switches to motion mode. Best thing to do is read the instructions and practice managing the system... some work easier than others...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motion sensor with lights [ 4 Answers ]

I installed a motion sensor with lights and on test it works great but when I moce the selector switch to 1 minute 3 minute or 5 minute for the lights to stay on the unit does not work

Motion Security Lights and Wireless Switches. [ 0 Answers ]

Hello, I'm trying to install some motion activated security lights on my home. It's easy enough to wire them directly in, but I wanted to be able to have manual control over them by a switch at the nearest windows to where the lights will be located. I didn't want to have the hassle of...

Wire a motion detector to flood lights [ 1 Answers ]

I need help to wire a motion detector to my outside flood lights that can be turned on from Three locations.

Can I disable motion sensor on outdoor lights? [ 1 Answers ]

I recently purchased new wall mount outdoor lights. They are motion sensor. I was told they would have the option to turn off the motion sensor. There is not a "switch" for that capability. Is there a way I can wire it to disable that function?

View more questions Search